Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
www.mobilex.dk
●
Put the mounting clamp on the horizontal side frame tube as it is shown on picture 11.
●
Move the sliding profle to fnd the optimum position of the brake, so it is quite easy to apply
the brake when necessary, but the friction between tire and the friction rod is strong enough
to efciently hold the wheelchair in stationary position.
●
Tie the fxing bolts, so the brake is stable and fxed.
●
Repeat those steps for the other side of the chair.
●
To apply the brakes simply push the brake lever towards front of the chair. To release brakes
pull the lever towards back of the chair.
Pic. 8: W
heel assembly
mounted on the frame
Pic. 9: The 24" wheel
with quick release
Pic. 10: Coping for
quick release bottom
Pic. 11: Mounting of
brakes to the frame.
Pic. 12: Check that the
brakes is in frm
contact with the tyre.
4. Technical data
Technical data
“Kakadu” tilt standard
Item no. 302024
“Kakadu” tilt Large
Item no. 302025
Differences with
24" wheels
Seat width
45 cm
50 cm
---
Seat depth
43 cm
43 cm
---
Seat height (adjustable)
55 - 60 cm
55 - 60 cm
---
Pass over height
---
---
---
Total width
56 cm
61 cm
+ 8 cm
Total depth
110 - 120 cm
110-120 cm
+ 5 cm
Total height (adjustable)
97 - 141 cm
97 - 141 cm
---
Max. load
130 Kg
150 Kg
---
Weight
15,60 kg
15,70 kg
+ 2,90 kg
Tilt angle
-5° to +25°
-5° to +25°
---
Product label
The product label is located in the bottom of the frame
Sample of the product label (not original)
5. Cleaning & maintenance
Cleaning
Normal dirt on metal and plastic parts can be removed with standard cleaning agents and sponge or
soft rag. Check the specifc product information and use only commercial cleaning products which
are suitable for cleaning and disinfection (do not use alcohol-containing products and no solvents or
Rev. 08.19
Page 6 of 7
UM-302024-25-GB
MOBILEX A/S
Grønlandsvej 5
DK - 8660 Skanderborg
Tel: +45 87 93 22 20
www.mobilex.dk
Shower chair
with tilt
Max. 130 kg
Produced
Serial no.
