6
MV2458 Router Control Unit Wireless Installation
Drilled Hole
Insert end of Blue Power Cord into drilled hole and
route Blue Power Cord to power source.
TV Distribution
Wall Plate
MV2458
Router
Control Unit
ON OFF
Satellite
TV 1
ON = TV
OFF = Cable
Locate a 12V power source for the MV2458 Router
Control Unit (such as a TV Distribution Wall Plate) that
is near to where you plan to mount the MV2458 Router.
Disconnect the RV power source before beginning installation, and reconnect
power after installation is complete.
1/4”
(to the Right)
Drill a 1/4” hole in the wall to the Right of where the
MV2458 Router will be installed.
Cover Plate
If you need to drill a larger hole, you can use the
provided Cover Plate to route the Blue Power Cord
through and cover the hole.
Alternative
Option
