2) Screw the Extender Housing Bottom Mount to roof
with
Self Tapping Screws (#8).
1) Center the Extender Housing Bottom Mount over
drilled hole.
Caulk the Extender Housing Bottom Mount on 1st
Level (shown in orange area).
WARNING
- Do not caulk on the 2nd Level (where the Top
Mount connects to the Extender Housing Bottom Mount).
Bottom
Mount
Self
Tapping
Screws #8
RV
Roof
1st Level
Caulking Area
Represented in
Orange
2nd Level
Drill a 1/2” hole from the exterior roof where the Extender Housing will be
mounted over. This hole will be used to route the WET-15 Shielded Ethernet Cable
from the MV2458 Router Control Unit to the MV2400 Extender in the housing.
(Inside RV)
(Rooftop)
(Back Side of
RV Ceiling)
18
MV2400 Extender Ethernet Installation
