16
MV2458 Router Control Unit Ethernet Installation
1) Drill a 1” hole in the wall near where the router is
later planned to be installed.
3) Bring the connected Blue Power Cable through
the drilled hole.
2) Route Blue WiFi Cable into hole and up to roof
where the Roof Mount hole will be drilled.
Blue
WiFi Cable
Note:
You do not need a Switch
and power supply for the
MV2400 Extender as it will be
powered by the Ethernet cable.
Choose a way to route an Ethernet cable from the MV2400 to the MV2458.
MV2458
MV2400
ON OFF
Satellite
TV 1
ON = TV
OFF = Cable
Blue
Power Cord
Connectors
Black
Red
12V(+)
Ground
Attach the Blue Power Cord’s red wire to a 12V(+)
power source and the black wire to a 12V(-) ground
and secure with connectors.
WARNING
- Red Wire must connect to 12V(+) wire
from the vehicle, & Black Wire must be connected to
12V(-)wire from vehicle.
Back of TV antenna
distribution wall plate
