12 VOLT DC POWER PORT OPERATING INSTRUCTIONS:
IMPORTANT:
The
Internal auto-reset Circuit Breaker will automatically interrupt the power if the current
drawn exceeds 10Amp.This feature prevents damage to the BoostPak2 internal circuits. Internal Circuit
Breaker will automatically reset after cooling period (Approximately 10-25 minutes).
Make certain that the BoostPak2 internal battery voltage is 12.0 or higher before proceeding to
the next steps.
1. Remove the 12 Volt DC Accessory protective cover.
2. Insert the device 12 Volt accessory plug into the 12 Volt DC Accessory Port of BoostPak2.
3. Turn on the power to the 12 Volt DC device being powered by the BoostPak2 unit.
DC PLUG FUSE REPLACEMENT:
1. Unscrew the retainer ring and screw at the tip of the BoostPak2 DC Plug.
2. Replace the internal glass fuse with the same grade Fuse rated at 25 A.
3. Replace the retainer ring and Screw accordingly as shown below.
Model No. 2019
S
he
et
6
of
8
25 A Fuse
DC Plug - Vehicle
Boost Start and
DC Charger
