TROUBLESHOOTING GUIDE:
TROUBLE RECOMMENDED SOLUTION
Vehicle does not start Make sure the BoostPak2 DC Plug is connected properly to the vehicle
cigarette lighter or 12V DC Accessory socket.
Allow the BoostPak2 to stay connected to the vehicle cigarette lighter or
the 12V DC Accessory socket for a longer period of time. Wait 20 to 30
minutes before attempting to restart the vehicle again.
Recharge the BoostPak2 to a FULL charge status 16.0V - 16.8V.
Turn on the vehicle ignition and wait for 10 to 15 minutes or when the
voltage on the display LCD shows 12.0 Volt or higher
Replace the vehicle battery or visit workshop/garage for further
assistance.
Vehicle voltage stays below Visit workshop/garage for further assistance.
10.4 Volt after 30 minutes
12 Volt DC devices Recharge the BoostPak2 to a FULL charge status.
connected to the 12 Volt
output port of the
Insert the device 12 Volt plug properly into the BoostPak2 DC output port
BoostPak2
does not operate.
Internal Circuit Breaker is OFF. Remove the 12 Volt Accessory plug from
The BoostPak2 12VDC output port. Wait 15 - 25 minutes for automatic
Reset to regain power.
USB powered device Press the Power ON/OFF Toggle Switch to Mode = USB Power ON.
connected to the USB of
The BoostPak2 doesn’t Insert the device USB plug properly into the BoostPak2 USB port.
Function.
Model No. 2019
S
he
et
7
of
8
