Touch User Guide
28
Testing your Mobile Device with Central Station
For Mobile Device Light Indicator information, please see page 29
Press and hold the TEST button on Mobile Device (the button on the side
with the letter “T”). (Please refer to Figure 15)
You will hear an announcement over the Mobile Device that will instruct you
to press the Emergency Button or Pendant.
Press the Neck Pendant, Wrist Button OR the Emergency Button on the
Mobile Device.
The Mobile Device will announce “test call sent to Emergency Response Center.”
If your test was successful, you will hear “thank you for testing your device” from the Mobile Device.
If the help button on your Mobile Device is not working properly, or if the green light is blinking rapidly
(blinking once every second), please call Technical Support.
Test your Help Buttons
If your test was not successful, please contact Technical Support.
Please remember, it is important that you test your system at least once a month.
Figure 15
TEST Button
Emergency
Button
When testing your Mobile Device, test it in close proximity to your tablet if you are going to test by
using a neck pendant or wrist button as the signal will also be received by the Touch when you are
testing. If a live operator speaks to you, please state clearly that “THIS IS A TEST.” If you do not
explain to the operator that you are okay and that you are testing, EMS will be contacted.
Summary of Contents for Touch
Page 1: ...Touch User Guide ...