EN
MCF40, MCF60
Operation
15
6.10
Defrosting the cooling device
Humidity can form frost in the interior of the cooling device or on the evapora-
tor. This reduces the cooling capacity. Defrost the cooling device in good time
to avoid this.
A
To defrost the cooling device, proceed as follows:
➤
Take out the contents of the cooling device.
➤
If necessary, place them in another cooling device to keep them cool.
➤
Switch off the cooling device.
➤
Leave the lid open.
➤
Wipe off the defrosted water.
6.11
Replacing the AC fuse
D
➤
Remove the connection cable.
➤
Pry out the fuse holder (fig.
3
2, page 9) with a screwdriver.
➤
Replace the defective fuse with a new one that has the same rating
(T4AL250V).
➤
Press back the fuse holder into the housing.
NOTICE! Danger of damage!
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
DANGER! Danger of electrocution!
Disconnect the connection cable before you replace the AC fuse.
MCF40-MFC60--O-AUS.book Seite 15 Mittwoch, 9. Januar 2019 4:41 16
