EN
MCF40, MCF60
Operation
13
➤
Connect the cooling device (chapter “Connecting the cooling device” on
page 11).
A
➤
Press the “ON/OFF” button for between one and two seconds.
✓
The “POWER” LED lights up.
✓
The display switches on and shows the current cooling temperature.
I
✓
The cooling device starts cooling the interior.
I
6.6
Latching the cooling device lid
➤
Lift the latch (fig.
1
1, page 8) and close the lid.
➤
Release the latch.
✓
The latch audibly clicks in place and secures the cooling device lid.
6.7
Setting the temperature
➤
Press the “SET” button once.
➤
Use the “+” and “–” buttons to select the cooling temperature.
✓
The cooling temperature appears in the display for a few seconds. The dis-
play flashes several times and then the current temperature is displayed
again.
NOTICE! Danger from excessively low temperature!
Ensure that only those objects are placed in the cooling device
that are intended to be cooled at the selected temperature.
NOTE
The temperature displayed is that of the middle of the interior.
The temperatures elsewhere can deviate from this temperature.
NOTE
When operating with the battery, the display switches off auto-
matically if the battery voltage is low. The “POWER” LED flashes
orange.
MCF40-MFC60--O-AUS.book Seite 13 Mittwoch, 9. Januar 2019 4:41 16
