Mobicool FR 35, Operating Manual

Page: 16 / 248

EN
FR35 AC/DC
Operation
15
6.10 Replacing the plug fuse (12/24 V)
➤
Pull the adapter sleeve (fig.
5
4, page 3) off of the plug.
➤
Unscrew the screw (fig.
5
5, page 3) out of the upper half of the housing
(fig.
5
1, page 3).
➤
Carefully raise the upper half of the housing from the lower (fig.
5
6,
page 3) half.
➤
Take out the contact pin (fig.
5
3, page 3).
➤
Replace the defective fuse (fig.
5
2, page 3) with a new one that has the
same rating (8A 32V).
➤
Re-assemble the plug in the reverse order.
I
6.11 Replacing the light bulb
➤
Press the switch pin (fig.
6
2, page 3) downwards so that the transparent
part (fig.
6
1, page 3) of the lamp can be removed at the front.
➤
Replace the light bulb.
I
➤
Press the transparent part of the lamp back into the housing.
NOTE – Internal DC fuse
There is an additional DC fuse inside the device (Automotive stand-
ard blade fuse, 10 A). This fuse can only be replaced by an author-
ised repair centre.
NOTE
The LEDs in the light bulb must be aligned with the transparent part
of the lamp.
Mobicool_FR35-B-16s.book Seite 15 Donnerstag, 18. Oktober 2018 10:47 10