EN
Operation
FR35 AC/DC
12
A
In “HIGH” mode, the battery monitor responds faster than at the levels “LOW”
and “MED” (see the following table).
This is how to select the battery monitor mode:
➤
Switch on the cooler.
➤
Press the “SET” button (fig.
2
4, page 2) three times.
➤
Use the “+” (fig.
2
6, page 2) and “–” (fig.
2
7, page 2) buttons to select
the battery monitor mode.
✓
The selected mode then appears in the display for a few seconds. The dis-
play flashes several times before it returns to the current temperature.
I
6.5
Using the cooler
A
NOTICE! Danger of damage!
When switched off by the battery monitor, the battery will no longer
be fully charged. Avoid starting repeatedly or operating current
consumers without longer charging phases. Ensure that the battery
is recharged.
Battery monitor mode
LOW
MED
HIGH
Switch-off voltage at 12 V
10.1 V
11.4 V
11.8 V
Restartvoltage at 12 V
11.1 V
12.2 V
12.6 V
Switch-off voltage at 24 V
21.5 V
24.1 V
24.6 V
Restart voltage at 24 V
23.0 V
25.3 V
26.2 V
NOTE
When the cooler is supplied by the starter battery, select the bat-
tery monitor mode “HIGH”. If the cooler is connected to a supply
battery, the battery monitor mode “LOW” will suffice.
NOTICE! Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the
heat that generated during operation can dissipate. Ensure that
the ventilation slots are not covered. Make sure that the device
is sufficiently far away from walls and other objects so that the
air can circulate.
Mobicool_FR35-B-16s.book Seite 12 Donnerstag, 18. Oktober 2018 10:47 10
Summary of Contents for FR 35
Page 2: ...Mobicool_FR35 B 16s book Seite 2 Donnerstag 18 Oktober 2018 10 47 10...
Page 175: ...RU FR35 AC DC 174 8 8 A Mobicool_FR35 B 16s book Seite 174 Donnerstag 18 Oktober 2018 10 47 10...
Page 176: ...RU FR35 AC DC 175 2 2 A Mobicool_FR35 B 16s book Seite 175 Donnerstag 18 Oktober 2018 10 47 10...
