Mobeye PowerGuard CM4100, User Manual

Page: 9 / 32

8
When using the Mobeye SIM card:
The Mobeye SIM card is PIN code secured and will only work in a Mobeye
device. Please do not place it in another device.
When using your own SIM card:
An own SIM card has a “micro” format, is suitable for the 2G network and can
make calls and send text messages. The PIN code is "0000", or the SIM card
is PIN code free.
(A PIN code can be changed or removed by putting the SIM card in to any mobile phone
and entering the 'security' menu.)
Note: make sure that the power supply is removed when inserting or
changing the SIM card. The settings are stored in the device memory.
3.2 INSERT THE BATTERIES
Insert the two batteries (CR123) in the module. Use the +/- indication for the
correct placement. If you replace the batteries the settings will not be
deleted, since they are stored in the device memory.
3.3 CONNECT AN EXTERNAL POWER SUPPLY
Connect the power adapter (or any other
regulated 12VDC power supply) to the power
input of the connector (press on the green pins
to connect the wires).
Mobeye adapter 10027 position
-
V+ to “+” black lead with white stripe left
-
Ground to “ - “ black lead 2 nd from left
3.4 CONNECT A SENSOR TO THE INPUT (OPTIONALLY)
Two external sensors can be connected to the inputs.