Mobeye CombiGuard CM4600, User Manual

Page: 6 / 36

5
1. GENERAL DESCRIPTION
The Mobeye CombiGuard is a monitoring device with an integrated
communication module used to send alarm notifications in various alarm
situations. The CombiGuard has a temperature sensor, water leakage sensor,
power adapter, inputs for battery voltage or potential-free inputs and an
(open collector) output. It can run battery operated or externally powered. If
an external power supply is used, it can also send a power failure alarm.
Since the CombiGuard is often used in the maritime world, this product is
nicknamed “ShipGuard” .
In order to activate the device, a few steps are to be followed.
First of all, you need to insert a SIM card. With the Mobeye SIM card, the
CombiGuard uses the 4G LTE-M network. This network has a strong network
coverage, deep penetrability in buildings and also works in remote areas. The
Mobeye SIM card is a 'multi-provider' and can be used internationally; it may
choose from several providers per country. In case of a network problem it
will switch to another provider or fall back to 2G. In addition, the Mobeye
SIM card offers access to the Mobeye Internet Portal. This management
environment gives the device essential functions such as online
programming, display of status and history, extensive possibilities for
reporting messages and will also monitor test messages (keep alive).
Optionally, alarm messages are sent as a push message via an app. The
relevant contact person will receive instructions and an installation link on
their phone.
It is also possible to place your own (2G) SIM card. The most important alarm
functions such as calling and/or texting after an alarm also work. The
communication goes entirely through the 2G network. The Mobeye Internet
portal features will not work.
Where the installation steps differ for both modes of use, this is indicated.
The use of the Mobeye Internet Portal with Mobeye SIM card is also referred
to as Mobeye SIM/Portal.