Mobeye CM2500, Portal User Manual, Page: 20 / 32

19
5.8 POWER FAILURE MESSAGE
If the Mobeye Panic Button is powered externally and the power fails, it is able to
make phone calls and/or send textual messages. There are three configuration
options: Alert, Alarm, Off.
Mobeye SIM/Portal Own SIM
Alert Message via portal SMS to TEL1
Alarm Call to TEL1···TEL5 and
message via portal SMS + call to TEL1···TEL5
Off No message No message
The default setting for the
‘power failure message’ is set to “ALERT”.
5.9 POWER FAILURE DELAY TIME
If the Mobeye Panic Button is powered externally and the power fails it can notify the
contact person(s). The power failure delay time defines the time between the initial
power failure and the alarm notification. If the power is restored within the delay
time, no alarm is sent. The time can be set between 0 and 999 minutes. As default,
the delay time is set to "0".
5.10 TEST MESSAGE
When using the Mobeye Internet Portal: The Mobeye Panic Button can send regular
test messages (
keep alive ) to the Mobeye Internet Portal, to ensure the proper
functioning of the unit. The test message will also be sent if the unit is disarmed. The
Mobeye Internet Portal expects the test message and checks the timely receipt. The
monitoring of the test messages follows
the ‘management by exception’ rule: only if
the message was not received, the
‘service’ contacts will receive a notification.
The timing of the test message can be programmed. Since new settings (options)
will be synchronised after the test message, setting a specific time of the test
message can help the process of remote programming. Example: if you force a daily
test message at 17.30 hrs, you can prepare new settings and be sure they are
loaded into the device before the evening.