Mobeye CM2500, Portal User Manual, Page: 15 / 32

14
4.5 CONFIGURATION AND SYNCHRONISATION
The device settings can be programmed in the Mobeye Internet Portal. In this way
you prepare the settings, to be picked up by the device. Since the Mobeye device is
leading in the communication between the portal and the device, the data
synchronisation is done after:
1) any message to the portal (e.g. the regular test message, alarm, low batteries).
2) reconnecting power and reinserting batteries.
3) in program mode: receiving the SMS command CODE SYNC (e.g. 1111 SYNC).
Once the device exchanges data with the portal, the LED quickly flashes green. A
battery-operated unit will first blink red-green until it connects to the network.
4.6 BASICS OF THE MOBEYE INTERNET PORTAL
Dashboard
With multiple devices, the dashboard shows all devices, with the (alarm) messages
in the last 24 hours, (missed) test messages and low battery status.
Select a device to go to the details of a specific device.
Status & History
The status block shows values that provide information about the status of the unit.
If the "Synchronized" status is set to "No", there are new settings or alarm numbers
that still need to be transferred to the device.
The GSM status shows the network strength at the last communication session. If
the value is lower than -95dB, consider another location for the device.
Click on the position icon to see the geographical location during the last report.
Note: this is an indication based on "cell-id".
The history displays all historical events. Click on "all events" to see the overview.