Mobeye CM2500, Portal User Manual

Page: 25 / 32

24
Setting SMS Command Options Default value
Actual date DATE: yyyymmdd Empty
Interva
l ‘test SMS’
TEST: 0···30 (days) 0
Time test message TESTTIME: hhmm
Examples:
Set phone number 1:
1111 TEL1:0712345678
Delete phone number 1: 1111 del1
Be aware of the space be
tween “1111” and the command.
The status can be requested via SMS command CODE STATUS? (1111 CODE?).
7.2 CONFIRMATION OF THE ALARM MESSAGE
When the system is triggered by pressing the on/off panic button for at least one
second, it will send alarm notifications. First an SMS text message is sent to all
programmed alarm numbers, followed by a phone call. When you pick up the phone,
you will hear beeps. It is possible to acknowledge the phone call by answering the
phone and pressing any key. The other alarm numbers will not be called afterwards.
This works for most telephones.
By switching off the SMS function the system will only call. This prevents the other
numbers being notified by SMS.
7.3 SYSTEM RESET
To reset the Mobeye Panic Button to its factory settings:
1. Remove the batteries (and external power supply).
2. Press the outside button while reinserting the batteries. Keep it pressed for
(about) another 5 seconds.
3. Release the button immediately after the LED starts to flash.
4. If relevant, connect the external power supply.
After a successful reset, the status LED on the keypad will blink green to indicate
that the module is not configured. The security code is back to factory settings as
well.