Mobeye CM2500, Portal User Manual, Page: 10 / 32

9
3. GETTING STARTED
To get started with the Mobeye Panic Button, at least the following steps need to be
taken in the following order:
1. Insert the SIM card
2. Insert the batteries
3. Connect an external power supply (optionally)
4. Connect an external emergency button (optionally)
5. Programming when using the Mobeye SIM/Portal
a. Sign up in the Mobeye Internet Portal
b. Activate the SIM card
c. Enter the program mode
d. Activate the device in the Mobeye Internet Portal
e. Program the options and synchronise
6. Programming when using your own SIM card
a. Enter the program mode
b. Program the settings
Steps 1 to 4 are described in sections 3.1 up to 3.3.
Step 5 is described in chapter 4. Step 6 can be found in chapter 6.
3.1 INSERT THE SIM CARD
Open the enclosure by removing the 4 screws
and insert the SIM card into the module. Push
the black cover slightly outward to open the
holder and close it afterwards.
When using the Mobeye SIM card:
The supplied SIM card has a PIN code
protection, which means that it can only be
used in the Mobeye device.
Note: do not place it in another device.