Mobatime NTS IT, Quick Installation Manual, Page: 10 / 12

© MOBATIME 10 / 12 801143.02
SFTP über SSH update
FTP TCP, Port 21 update
SNMP UDP, Port 161 operation
UDP, Port selectable (162) alarm notification, see SNMP
SMTP TCP, Port selectable (25) alarm mail see E-Mail
DHCP UDP, Port 68 dyn. address allocation (client)
DNS TCP/UDP, Port 53 address resolution (client)
DHCPv6 only IPV6
ECHO ICMP
“Ping“
SNMP V1, V2c, V3 with MD5 for authentication and DES for encryption (privacy).
E-mail Alarm reporting via SMTP.
Authentication at the mail server:
- with sender address
- with username/password SMTP-Auth with LOGIN,
PLAIN (RFC 4954) or CRAM-MD5 (RFC 2195)
no “POP before SMTP“ possible
DCF Input DCF77 or DCF from GPS, current loop active (nominal 24VDC)
max. 32mA, response threshold 8mA, time zone selectable
DCF / pulse output DCF time code or Synch-Pulse output selectable.
Passive power interface
Umax = 30 VDC, I
on
= 10..15 mA, I
off
< 1 mA @20VDC
Cable length max. 30 m (not in the 3-m area of a contact line (rail)).
DCF output: Time zone selectable
Pulse modi: Second, minute, hour,
user-defined interval: 1-3600 sec.
Pulse length: 20
– 500 ms, jitter pulse length: +/- 2 ms
Max. deviation from internal time: +/- 1 ms, jitter pulse start < 0.5 ms
Alarm reporting / E-Mail see E-Mail
Error reporting SNMP-Notification see SNMP-Trap
Alarm LED -
DC power supply 24
– 28 VDC / 200 mA
typical: < 75 mA @ 28 VDC with GPS4500
< 60 mA @ 28 VDC without external load
Mains power supply external power pack (Lieferumfang)
100
– 240 VAC / 50 - 60 Hz / max. 12 W
typical: < 7.5 VA @ 230 VAC with GPS4500
< 6.5 VA @ 230 VAC without external load
Power supply output nominal 24 VDC, max. 200 mA (for GPS receivers)