Mobatime ECO-M-DK, Instruction Manual, Page: 24 / 52

© MOBATIME
24 / 52 801317.00
5 The clock menu table
5.1 Menu page no. 1
– basic clock parameters
Program
item Function Scope of the values
(default values are printed in bold)
P0 Display brightness 1 - 30 , A (automatic adjustment, without the possibility of
changing in normal display mode)
The maximum brightness setting in manual mode can reduce
the life cycle of the LED displays in the long run. We
recommend leaving the brightness control to "auto" mode
(default value).
P1 Time display format 24 h, 12 h
P2 Time constants for
automatic data
switching over 1 -6, U , 0
1 continuous display of time + date
2 continuous display of time + temperature
3 reserve
4 continuous display of stopwatch
5
display sequence: time + date 6 sec, time +
temperature 3 sec.
6 reserve
U* time constants set up by user, in seconds for each specific
displayed data
0 automatic switching over disabled
P3 Time zone of
synchronization
source 0 - 64, A (automatically)
P4 Type of
synchronization
source
1 - 10, A (automatically)
A* auto detection, applicable for: DCF, the Mobatime serial
code, MOBALine, ActiveDCF or NTP
1* autonomous operation without synchronization
2* synchronization by DCF signal
3* the MOBATIME serial code
4* MOBALine
5* 24 V DC impulses, at minute intervals
6* 24 V DC impulses at half minute intervals
7* 24 V DC impulses at second intervals
8* not used
9* not used
10* RS485
11* not used
12* Active DCF code
P5 Impulse line
processing mode 1 -4
1 polarized impulses, synchronization and time adjustment
2 polarized impulses; time synchronization only
3 non-polarized impulses, synchronization and time
adjustment
4 non-polarized impulses; time synchronization only