© MOBATIME
9 / 124
801203.10
3
General Information: Introduction
3.1
Scope of Delivery
Please check your delivery for completeness and notify your supplier within 14 days
upon receipt of the shipment if it is incomplete.
The package you received contains:
•
DTS 4210.timecenter
•
Mounting set for rack mounting consisting of:
- 4 pcs nuts for 19" housing
- 4 screws M6 for the nuts
- 4 plastic discs for screws M6
•
Connector set
- 2 * plug 3-pole black for power supply
- 1 * spring terminal 6-pole orange
- 10 * spring terminal 2-pole orange
- 4 * spring terminal 5-pole orange
- 4 * spring terminal 2x5-pole orange
•
2 pcs mounting tools with spring terminals
3.2
Technical Data
See Appendix "H Technical data“.
3.3
Device Description in this Manual
This instruction manual is for the time server
DTS 4210.timecenter
.
3.4
Introduction
The
DTS 4210.timecenter
is a primary reference clock (PRC), Grandmaster and
Timeserver for high accurate synchronization of various equipment’s and for the use in
large network environments. It can be synchronized over GNSS, PTP, High Precision
DCF and E1. Equipped with a Rubidium Oscillator it has very high holdover accuracy,
ITU-T G.811 can be achieved.
It is a PTP grandmaster according to IEEE 1588-2008 for the synchronization of PTP
clients.
It is equipped with up to 16 network ports (IPv4/IPv6) for time distribution,
synchronization or configuration.
It can be used as a master clock for NTP slave clocks, synchronizes via NTP unicast or
multicast and with time zone information.
In addition, the DTS 4210 provides 4 lines for E1 / 2.048MHz, 4 IRIG/AFNOR lines
(available as analog and digital output) 8 configurable frequency outputs as well as 8
serial interfaces for the output of time telegrams.
To maintain a redundant time source, two DTS 4210 can be connected over an optical
link.
The DTS 4210 can synchronize master clocks or other equipment with DCF.
The DTS 4210 can send both e-mails and SNMP traps for alerting purposes.
Using MOBA-NMS and SNMP, the DTS 4210 can be fully operated and its
configuration and system status can be requested.
