3.7.3 CALIBRATION - HYDRAULICS
The Minimum and Maximum hydraulic signal settings can be determined by
selecting the option in the hydraulics menu.
In Hydraulics
menu using
key select ‘Calibration’, then press
calibration
,
[AUX2]
[ENTER].
The following sections re
a description of the calibration procedure for the left
side. A similar procedure should
followed for the right side.
be
Hydraulic - Left
Type [VO]
General Settings
Calibration
Advance Settings
Copy to Right
Exit
Calibration - Left
Min Test
Max Test
Exit
figure 18
