M I L L E N N I U M M E D I C A L P R O D U C T S , I N C .
6
Some LIFTEM unit CONTROLLERS are equipped with an EMERGENCY STOP switch,
found on the upward facing end of the CONTROLLER (see photograph below). This
switch is to be pushed in the event of an unexpected occurrence during lift operation.
When pushed, the switch interrupts all power to the LIFTEM actuators and causes the
system to come to a complete stop. The CONTROLLER can be reset by turning the
switch knob in the clockwise direction.
Safety Precautions:
1)
Prior to resetting the CONTROLLER verify that the patient is calm and is not caught
in any part of the Wheelchair/Bed, etc.
2)
Verify that the LEGS are fully spread and extended.
3)
Verify that the patient and any personnel assisting in the procedure being performed
with LIFTEM are clear of any moving parts around the BASE.
2. Lift and Transfer Patient From Bed
a) Preparing the Patient
•
Explain the lift and transfer procedure to the patient prior to
starting.
•
Select the proper sling and place it along the patient’s side.
•
Roll the patient toward you and then position the sling flat next
to the patient. (See Chapter 5, Sling Manual.)
•
Then allow the patient to roll back onto the sling.
