Overload indication:
Separately for each channel, at inputs and after integrators.
Thresholds for measuring ranges:
±1.2 mV / ±12 mV / ±120 mV / ±6 V
Memory:
Flash memory for 1000 to 3000 measuring values, depending
on the recording mode, optionally with time, date and
comment
Recording modes:
Manually by SAVE key or
Logging, time controlled, time interval 1 second to 10 hours
Serial interface:
Socket type
Binder
711, female, 3 pins
Baud rates: 19200 / 38400 / 57600 / 115200
Parity: even, data bits: 7, stop bits: 1
Batteries:
3 Alkaline cells or NiMH accumulators type IEC LR6
(Mignon)
Battery operating time:
15 to 25 hours
Battery indication:
20 segments, nominal battery voltage selectable, acoustical
low voltage warning
External power supply:
8 to 12 V DC, < 200 mA, peak current: 1 A
socket type
Binder
711, female, 5 pins
Shut-off timer:
After 1, 10, 30 minutes or no shut-off
Operating temperature range:
-10 to 50 °C, < 95 % relative humidity without condensation
Deviation over temperature and
humidity range:
Instrument:
< ± 1 % of reading
Sensor KS943B.10:
< ± 2 % of reading
Sensor KB103SV:
< ± 3 % of reading
Protection grade:
IP65 (protected against water jetting)
Dimensions:
165 x 92 x 31 mm³
Weight including batteries:
350 g
Supplied accessories:
VM30-I:
RS-232 interface cable
with USB/RS-232 adapter
Optional accessories:
034:
Signal cable, 0.5 m,
Binder
711 / 3 BNC
plugs
KB103SV-100: Triaxial seat accelerometer
KS943B.10:
Triaxial accelerometer for hand-arm
measurement
091:
Cable for KS943B.10; 3 m
140:
Adapter for the fixation of the accelerometer
KS943B.10 on curved surfaces
142:
Hand-held adapter for the accelerometer
KS943B.10 on curved surfaces
144:
Calibration adapter for the seat accelerometer
KB103SV-100
Accessory kits:
VM30-HA:
Hand-arm kit
VM30-WB:
Whole-body kit
VM30HAWB: Hand-arm and whole-body kit
51