MLis MLB-G420 Series, User Manual

Page: 37 / 89

Item Description
Enable
1. Enable the SNMP Agent setting.
2. Click Apply to save settings.
3. Need to go to “ Save ” then click on the save button
to complete the process
Save
Read community / User
Indicates the community read access string to
permit access to SNMP agent. The allowed string
length is 0 to 255, and the allowed content is the
ASCII characters from 33 to 126.
The field is applicable only when SNMP version is
SNMPv1 or SNMPv2c. If SNMP version is SNMPv3,
the community string will be associated with
SNMPv3 communities table. It provides more
flexibility to configure security name than a
SNMPv1 or SNMPv2c community string. In addition
to community string, a particular
range of source addresses can be used to restrict
source subnet.
Write Community
Indicates the community write access string to
permit access to SNMP agent. The allowed string
length is 0 to 255, and the allowed content is the
ASCII characters from 33 to 126.
The field is applicable only when SNMP version is
SNMPv1 or SNMPv2c. If SNMP
version is SNMPv3, the community string will be
associated with SNMPv3
SNMP Agent Version
Indicates the SNMP supported version. Possible
versions are:
SNMP v1: Set SNMP supported version 1. SNMP
v2c: Set SNMP supported version 2c. SNMP v3: Set
SNMP supported version 3.
User Authentication
Protocol
Select No Auth to use an administrator account to
access objects without authentication.
Select
MD5 to authenticate using HMAC-MD5
algorithms where the minimum requirement is to
use an 8-character password.
Select
SHA to authenticate using HMAC-SHA
algorithms where the minimum requirement is to
use an 8-character password.
Private Object ID
The private object ID (OID) is the enterprise value for
the MLB-G420X.