MLis MLB-G420 Series, User Manual

Page: 23 / 89

3.5 Web Console
Power on MLB-G420X and use Ethernet Cat cable to configure MLB-G420X.
Web Console management ~
Factory default IP: 10.0.10.1
Subnet mask: 255.255.255.0
Please set PC & MLB-G420X into same subnetwork. The Default IP of MLB-G420X is 10.0.10.1/24. Please
set up your PC with the same network segment, such as 10.0.10.2/24. So you can use browser to access
the web console of MLB-G420X for further configuration or management. Please configure the gateway
such as default IP address 10.0.10.1/24 of MLB-G420X on your PC if you wish to route the traffic from
LAN to Cellular WAN.
Please enter username and password as below to enter the web console:
Username: admin
Password: 1234
Note:
1. If you leave the web-based console management interface unused for 5 minutes, you would be
logged out and need to re-enter from this log-in page.
2. It is recommended to use the browser of Chrome v54, Firefox v49 or IE v11 above for web
console management.