MLis MLB-G420 Series, User Manual

Page: 77 / 89

MLB-G420X Wireless Terminal User Manual 77 Rev 1.1
5 MLiS Cellular Control Protocol (MCCP)
MLiS user can remotely control MLB-G420X through MLiS Cellular Control Protocol. MLiS Cellular
Control Protocol is open to MLiS user.
The MCCP should be converted to hexadecimal then count with checksum. If any question about MCCP,
please feel free to contact us.
support.mlis@schmidtelectronics.com
MLB-G420X MCCP (SMS / Host via internet / Host via RS232)
Initial Step
Protocol Action
MLB-CONFIGSTAGE1 Waiting for : IN STAGE1
HEX:
4D 4C 42 2D 43 4F 4E 46 49 47 53 54 41 47 45 31 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 9D
MLB-CONFIGSTAGE2 Waiting for : IN STAGE2
HEX:
4D 4C 42 2D 43 4F 4E 46 49 47 53 54 41 47 45 32 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 9C
MLB-CONFIGSTAGE3
Waiting for : MLB-G420X into configuration mode
HEX:
4D 4C 42 2D 43 4F 4E 46 49 47 53 54 41 47 45 33 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 9B
Notice :
The wireless terminal will exit the configuration mode automatically when wireless terminal
does not get any MCCP exceed 12 seconds in working mode.