ML BT CTEMS Series Installation & Maintenance Manual Download Page 8

WARRANTY

This product has a warranty of 3 years (excluding battery) from date of purchase. Failure 
to install this product in accordance with the current edition of the IEE Wiring Regulations, 
improper use, or removal of the batch codes will invalidate the warranty. If this product 
should fail within its warranty period, it should be returned to the place of purchase for a 
free of charge replacement. ML Accessories does not accept responsibility for any installation 
costs associated with the replacement product. Your statutory rights are not affected. ML 
Accessories reserve the right to alter product specification without prior notice.

For non-emergency versions: 
 
GENERAL 

This product contains a light source of energy efficiency class D to Regulation (EU) No. 2019/2015. 

This product contains an LED light source which can be replaced by the end user and a control gear which can 

be replaced by a professional. 

 

Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the 

product. 

Do not use any source of high-pressure washers to maintain or clean this luminaire. 

This product is non-dimmable. 

This product should be dismantled for disposal when it reaches the end of its life. Please see website for 

dismantling instructions. 

This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities 

for where facilities exist.  

 

 

 

For emergency versions: 
GENERAL 

This product contains a light source of energy efficiency class D to Regulation (EU) No. 2019/2015. 

This product contains an LED light source which can be replaced by the end user and a control gear which can 

be replaced by a professional. 

 

Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the 

product. 

Do not use any source of high-pressure washers to maintain or clean this luminaire. 

This product is non-dimmable. 

This product should be dismantled for disposal when it reaches the end of its life. Please see website for 

dismantling instructions. 

This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities 

for where facilities exist.  

The batteries in this luminaire are Lithium Ion and must be disposed of correctly. Please contact the local 

authorities for the disposal of this toxic waste. 

Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which 
may damage the product.
Do not use any source of high-pressure washers to maintain or clean this luminaire.
This product is non-dimmable.
This product should be dismantled for disposal when it reaches the end of its life. Please 
see website for dismantling instructions.
This product should be recycled in the correct manner when it reaches the end of its life. 
Check local authorities for where facilities exist. 
The batteries in this luminaire are Nickel Cadmium and must be disposed of correctly. 
Please contact the local authorities for the disposal of this toxic waste.

Summary of Contents for BT CTEMS Series











Reviews: