•
The additional terminal called Slave Live
(L’)
is available to enable the sensor to power on additional
luminaires. A max. LED load of 400W can be controlled by the sensor
•
Please see DIP Switch Layout to set up sensor
•
Connect the battery to the inverter
•
Refasten the LED plate screw
•
Choose the required colour temperature by means of the DIP switch (see Fig. 4)
Fig. 4
•
Reattach the diffuser by rotating clockwise
•
Switch on and check for correct operation, ensuring the green indicator LED is illuminated
•
We recommend, on commissioning the installation, a minimum charge period of 24 hours before
carrying out an emergency duration test
Note: this fitting shuts off power to the Lithium Ion battery periodically to prevent overcharging.
Therefore, the green LED indicator has been set up to indicate that the emergency inverter is in good
condition, not to indicate that the battery is charging. The installer must ensure that the battery is
connected.
SENSOR LAYOUT
DIP SWITCH LAYOUT
• If the batteries have been left in a discharged state for an extended period, we
recommend that one or more charge and discharge cycles are completed which should
help to restore the battery capacity