4
DCSEP19V2
GENERAL
WARRANTY
CONNECTION ACCESSORIES
The unit should be recycled in the correct manner when it reaches the end of its life. Check local authorities for
where facilities exist.
Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the
product.
This product is dimmable when used with LEDFR1 or LEDFR7 dimming controllers
This product has a warranty of 3 years from date of purchase. Failure to install this product in accordance
with the current edition of the IEE Wiring Regulations, improper use, or removal of the batch codes will
invalidate the warranty. If this product should fail within its warranty period it should be returned to the
place of purchase for a free of charge replacement. ML Accessories does not accept responsibility for any
installation costs associated with the replacement product. Your statutory rights are not affected.
ML Accessories reserve the right to alter product specification without prior notice.
The LED Strip connectors can be used for reattaching the separate segments of cut-to-size Flex.
Compatible connectors;
• CONSS2P – Flexible connection joining 2 LED strips together
• CONFLEX2P - Flexible connection joining 2 LED strips together
• CON2P – Rigid connection joining 2 LED strips together
• CONT2P – Rigid connection joining 3 LED strips together
• CONX2P – Rigid connection joining 4 LED strips together
INSTALLATION
• Open the cap to solderless connector
• Slide the LED Flex end, with the LEDs facing up, all
the way into the solderless clamp
• Close the hinged clamp
• Ensure correct polarity on both sides as marked on
the LED Flex
WARRANTY
This product has a warranty of 3 years from date of purchase. Failure to install this product in accordance with the current
edition of the IEE Wiring Regulations, improper use, or removal of the batch codes will invalidate the warranty. If this
product should fail within its warranty period it should be returned to the place of purchase for a free of charge
replacement. ML Accessories does not accept responsibility for any installation costs associated with the replacement
product. Your statutory rights are not affected. ML Accessories reserve the right to alter product specification without prior
notice.
CONNECTION ACCESSORIES
The LED Strip connectors can be used for reattaching the separate segments of cut-to-size strip lights.
Compatible connectors;
•
CONSS2P – Flexible connection joining 2 LED strips together
•
CONFLEX2P - Flexible connection joining 2 LED strips together
•
CON2P – Rigid connection joining 2 LED strips together
•
CONT2P – Rigid connection joining 3 LED strips together
•
CONX2P – Rigid connection joining 4 LED strips together
INSTALLATION
•
Open the cap to solderless connector
•
Slide the LED Flex end, with the LEDs facing up, all the way into the solderless clamp
•
Close the hinged clamp
•
Ensure correct polarity on both sides as marked on the LED Flex
ML Accessories Limited
LU5 4LT
www.mlaccessories.co.uk
ACCESSORIES LTD
ACCESSORIES LTD
ACCESSORIES LTD
ACCESSORIES LTD
