background image

Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the 
product.
Installing in areas where the temperature consistently drops below 0°C may shorten the battery life.
This product is non-dimmable.
This product should be dismantled for disposal when it reaches the end of its life. Please see website for 
dismantling instructions.
This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities 
for where facilities exist. 
The batteries in this luminaire are Lithium Ion and must be disposed of correctly. Please contact the local 
authorities for the disposal of this toxic waste.

WARRANTY

This product has a warranty of 5 years (excluding battery) from date of purchase. Failure to install this product 
in accordance with the current edition of the IEE Wiring Regulations (BS7671), improper use, or removal 
of the batch code will invalidate the warranty. If this product should fail within its warranty period, it should 
be returned to the place of purchase for a free of charge replacement. ML Accessories does not accept 
responsibility for any installation costs associated with the replacement product. Your statutory rights are not 
affected. ML Accessories reserve the right to alter product specification without prior notice.

Summary of Contents for BATSCWST4










Reviews: