manualshive.com logo in svg

MKS HPS LPV1-25-AC Series, Operation And Maintenance Manual

Share
Download
MKS HPS LPV1-25-AC Series Operation And Maintenance Manual Download Page 11

3

HPS

HPS

HPS

HPS

HPS

®

 Square Body LoPro

 Square Body LoPro

 Square Body LoPro

 Square Body LoPro

 Square Body LoPro

Seri es

Seri es

Seri es

Seri es

Serie s

HPS

®

 Square Body LoPro valves are pneumatically or manually operated

bellows sealed poppet valves, designed for compact size, lightweight, and
long life.

Internal actuation in the pneumatic version of the Square Body LoPro valve
is controlled by a pneumatic cylinder attached directly to the top of the
valve. The valve is opened when pneumatic pressure is supplied to the
bottom of this cylinder. When the air is vented, the valve is closed by an
internal spring. In the event of a power or pneumatic failure, the valve
returns to its closed position.

Internal actuation in the manual version of the Square Body LoPro valve
is controlled by a knob located on the top of the valve.  The valve is
opened when the knob is turned counter clockwise to the topped out
position.  The valve is closed when the knob is turned clockwise to the
bottomed out position.

The bodies of both the pneumatic and manual versions of the valve are
available in angle and concentric in-line configurations with a variety of
flanging. Custom body configurations and flange combinations are available
upon request.

O-rings function as face seals on the bonnet and nosepiece, while a metal
bellows is used to seal the moving poppet.  O-rings are available in a
variety of elastomers.

Optional limit switches for the remote indication of open and closed
positions are available for the pneumatic version only.   These limit switches
are mounted on the top of the cylinder and are directly actuated by a cam
extending from the upper end of the stem.

A solenoid operated pneumatic pilot valve may, optionally, be installed in
the pneumatic version only. This pilot valve allows electrical control of the
Square Body LoPro valve while it is connected directly to the facility
pneumatic supply. Solenoid valves are available in a variety of voltages.

3. Description of

LoPro Valves

Summary of Contents for HPS LPV1-25-AC Series





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands