mk North America, Inc.
|
105-125 Highland Park Drive
|
Bloomfi eld, CT 06002
|
860.769.5500
|
www.mknorthamerica.com
©2017
|
Page 25
8
CONVEYOR BELT MAINTENANCE - BELT REPLACEMENT (CONT.)
8.1 Standard Idler
All work to be performed by qualifi ed personnel only.
Loosen all bolts and push the entire head (1) inwards (in
the direction of the arrow), in order to create slack in the
timing belt.
Remove the closure strip (3) by sliding the material out of
the end.
This will expose the belt return channel.
Remove the belt return guard (2) by removing all screws.
Do this at BOTH ends of the conveyor.
Removing the Belt:
• The belt can now be replaced once all auxiliary obstructions are removed.
• To replace belt, slip it over the side of the conveyor and fi t into the return channel.
• Reassemble conveyor in the reverse order and the track and tension belt.
Additional Notes for ZRF-P 2010 BC:
Relax the nip drums (see Item 9 from Section 6) in their location. Once the side of the conveyor is exposed;
the drive assembly needs to be disassembled in order to thread out the old belt. Do this on the same side
as the closure strip (3) from above. Thread belt back through drive assembly and then over idlers.
