21
ALWAYS
ensure there is a sufficient amount of clean water in the Water Tank and the Filter is submerged in
the water to ensure proper performance of the misting system and to prevent Pump damage.
TX-3
OPERATION
2. Turn on equipment with the Toggle Switch (D) to make sure fine mists are delivered through Misting
Nozzles.
A
C
B
WARNING
ALWAYS
disconnect unit from power supply when performing changes or adjustments.
SAW SETUP
1. Rotate Table Lock (A) clockwise to release Table (B) from lock position.
CAUTION
NOTICE
Move Table (B) all the way to the Front End Cap (C), hold Table (B) in place and rotate Table Lock (A)
counterclockwise to lock Table (B) in place for transportation.
D
Summary of Contents for TX-3
Page 28: ...28 TX 3 MAINTENANCE WIRING DIAGRAM ...
Page 48: ...48 TX 3 NOTE PAGE ...
Page 51: ...51 TX 3 NOTE PAGE ...
