BX-4
23
SETUP, ADJUSTMENT & OPERATION
6. CLEANUP:
• Pull straight back to remove the Motor Filter Cap (1).
• Pull Foam Filter (2) out of the Filter Cap,
(Clean Foam Filter by tapping it on a hard surface
or by using compressed air to dislodge dirt).
• Reinstall the Foam Filter into the Filter Cap.
• Align the Filter Cap Retaining Hole with the Spacer
Pins (3). Push the Filter Cap (1) onto the Spacer
Pins to seat onto Motor.
• Clean the Movable Cutting Table Roller Wheels
and Guide Rails.
* Clean build up of debris from Splash Curtain.
• Clean the remainder of the BX-4 with a clean cloth.
• Always wear eye protection when using compressed air.
• Disconnect unit from power supply & unplug GFCI from BX-4.
WARNING
1
2
3
