45
(A)
Move the Cutting Table back and
forth to verify Blade is even
across all points of Square.
(B)
Tighten Guide Bar
Retaining Bolts.
(C)
Move the Cutting Table back and
forth to re-verify Blade is even
across all points of Square.
HD-101R Pro24
TRoUBleSHooTinG
HoRizonTal aliGnMenT VeRiFiCaTion
90º-alignment verification ensures the blade cuts tile straight up and down and not at an angle.
The Diamond blade must be removed and reinstalled when removing the blade guard.
(A)
Remove Blade Guard and
water pan.
(B)
Position Square on Movable
Cutting Table against
the Diamond Blade.
(C)
Verify the Diamond
Blade is Square to the
Movable Cutting Table.
90° aliGnMenT VeRiFiCaTion
noTe: If the blade is misaligned following 90º-alignment verification, return the saw to
MK Diamond for repair.
