6 3
DMX channel
Channel
Value
Function
6CH
10CH
CH1
0
No function
No function
1-255
Red dimmer
Main Dimmer
CH2
0
No function
No function
1-255
Green dimmer
Red dimmer
CH3
0
No function
No function
1-255
Blue dimmer
Green dimmer
CH4
0
No function
No function
1-255
White dimmer
Blue dimmer
CH5
0
No function
No function
1-255
Amber dimmer
White dimmer
CH6
0
No function
No function
1-255
Purple dimmer
Amber dimmer
CH7
0
No function
1-255
Purple dimmer
CH8
0
No function
1-255
Strobe
CH9
0-8
No function
9-50
Custom Color mode
51-100
Auto Color mode
101-150
Auto Sudden mode
151-200
Auto Fade mode
201-220
Sound Mode 1
221-240
Sound Mode 2
241-255
Sound Mode 3
CH10
0
No function
1-255
Macro speed
●
During long periods of non-use, disconnect the unit
‟
smain power.
●
Always mount this unit in safe and stable matter.
●
Power-supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them, paying particular attention to
the point they exit from unit.
●
Cleaning -The fixture should be cleaned only as recommended by the
manufacturer. See “Cleaning” for details.
●
Heat -The appliance should be situated away from heat sources such as
radiators, heat registers, stoves, or other appliances (including amplifiers) that
produce heat.
●
The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a marked
change in performance
●
Fuse standard is 2A/250V
●
Grounded using yellow/green line
●
The ambient temperature must always be under +35° C
Set Up
Power Supply:
Before plugging your unit in, be sure the source voltage in your
area matches the required voltage for your light is workable in
100-220V/50~60Hz. Because line voltage may vary from venue to venue, you
should be sure your unit voltage matches the wall outlet voltage before
attempting to operate you fixture.
Operating Instructions
Operating Modes: You can use the light in 5 ways:
●
Sound activation – The unit will activated by the sound signal.
●
Static display – The unit will display the color in static way.
●
Auto Mode -The unit will automatically chase through the different patterns.
●
DMX control mode -This function will allow you to control the lighting with a
standard DMX 512 controller.
●
Battery powered – This function will allow you to control the lighting
independently without any DMX cable
DMX Mode:
Operating through a DMX controller give the user the freedom to
create their own programs tailored to their own individual needs. This function
also allows you to use your fixtures as pattern changing lights.
