4 5
1. This function will allow you to control each individual fixtures traits with a
standard DMX 512 controller.
2. The light use
6/10
DMX channels to operate. Please see “DMX channel and
Functions” for the DMX traits.
3. To run your fixture in DMX mode, plug in the fixture via the XLR connections to
any standard DMX controller. Set your desired DMX address following the setup
specifications that come with your DMX controller.
4. The unit can automatically recognize the DMX signal once the DMX connection
is done.
DMX Linking:
To ensure proper DMX data transmission, when using several DMX fixtures try to
use the shortest cable path possible. The order in which fixtures are connected in
a DMX line does not influence the DMX addressing. For example; a fixture
assigned a DMX address of 1 may be placed anywhere in a DMX line, at the
beginning, at the end, or anywhere in the middle. When a fixture is assigned a
DMX address of 1, the DMX controller knows to send DATA assigned to address
1 to that unit, no matter where it is located in the DMX chain.
Touch Buttons instruction:
There are four touch buttons under the LED Alpha-numerical display: Menu,
Down, Up, Enter. Normally, the LED will display the current DMX address code of
the fixture. At this time, presses Menu to choose the function you want to set up.
Press and hold Up or Down to fast scrolling within the menu options. When an
options flashing the LED display, press Enter to confirm and Menu to exit.
Menu display function
DMX512
Shows
Sound
Color
Set
Help
A001
1.Auto Color
Speed(1-99)
1.Sound Model 1
Sensitivity (1-100)
1.Custom Color
1.DMX Channel
6CH/10CH
Name:
6 Color
2.Auto Fade
Speed(1-99)
2.Sound Model 2
Sensitivity (1-100)
2.Static Color
(1-32)
2.2.4g wireless
ON/OFF
Version:
V4.0
3.Auto Sudden
Speed(1-99)
3.Sound Model3
Sensitivity (1-100)
3.Infrarrd(
IR
On/Off)
ON/OFF
DMX
Channel:
4.Auto Strobe
Speed(1-99)
4.Sound Model 4
Sensitivity (1-100)
4.Display backlight
0-100
％
Run Time:
5.
Wifi Mode
(When
you
need use Wifi
to control,
please choose
this mode)
5.Lcd Close time
1. Open
2. 5S
3. 10S
4. 15S
5. 30S
User Time:
6.Fan speed
1.Auto seed
2.Slow seed
3.Middle seed
4.Fast seed
Temperature:
7.Restore factory
(8888)
8.MANUAL
(6666)
9.Temperature
ON/OFF
10.Battery
ON/OFF
12.BackgroundColor
(0-8)
Infrared Settings:
●
When use remote control, you need set it turn on.
●
If you want use remote control to do master-slave function, you should be only
one light do master light and turn on IR, other slave light should be turn off IR.
Wireless setting:
●
When use wireless DMX, you need set it turn on.
Wifi Mode setting:
●
When use WIFI to control, you need set on this mode.
●
Use mobile phone search Wifi and connect.
●
Then you can turn on App LED WIFI, it can be control it.
