MJ LED LIGHTNING MJ-1029A, User Manual

Page: 8 / 12

8

Main Menu
Touch the menu to into setting.

Sub Menu
Sub menu include address, run mode, test mode, language , Setup and sys info. Press the main menu to do each
setting.
Run mode
, “√” is mean to the currently run mode.
At the same time, only running one mode. When you
select DMX mode and auto mode, Press “ ENTER”, also can choose different DMX mode and auto mode.

DMX mode,When the light in the DMX mode, then also can be slave mode. If the light connect to
the DMX control signal, then it is DMX mode. If you connect the light is Master signal, then it is
running slave mode.

Auto mode, auto mode also can be master mode.

Sound mode,When the light in sound mode, it can’t be master mode.
Address setting ,
after you finished the setting, then you need to press “ ENTER” button to keep the address
code and return to main menu.
Language ,
menu language can choose Chinese or English.
Setup mode,

Pan reverse set

Tilt reverse set

Pan Calibration

Tilt Calibration

Focus Calibration

Code wheel: If off, ID code will failure in reset and running mode, can’t record correct position of
pan and tilt. Will recover from wrong running operation. Reset can be max travel reset from code
wheel reset.

Signal link : When turn on signal link, cut off control signal will be remain disconnected before the
control signals

Handspike delay, when switch on handspike delay, the controller handspike can achieve soft
dimming effect. Handspike delay can be chosen ON/OFF on the controller.

ID code, ID code is using for DMX mode in the channel16
th
,when the value of channel 16
th
over
number 9,only ID code corresponding to the front two value which in 16
th
channel, then other
channel value are available now.(This model have no this function)

Temperature: Protect temperature, when start temp protect function, if test temperature over protect
temperature, then brightness will be reduce a half.

Temp Switch: Temperature protect switch.

Screen protect: It can be set turn off,mode1 and mode 2.When it’s OFF, then won’t enter screen
protect condition. When in mode 1,it will clear the screen. When in mode 2,after you into screen
protection, big letter display current address code. Touch the screen, you can exit screen protect
condition, and return main menu.

Screen Rot: this menu can let the screen inversion 180 degree.

Logo: if display logo

Reset: reset function

Red Current: Red current adjust

Green Current: Green current adjust

Blue Current: Blue current adjust