Mizuho MOT-VS600, Operator'S Manual

Page: 74 / 78

70
App .- 1 Electromagnetic Compatibility
Install and operate according to the EMC information provided in this manual.
Guidelines and manufacturer declaration – electromagnetic emissions
The MOT-VS600 is intended for use in the electromagnetic environment specified below.
The customer or user of the MOT-VS600 must ensure that it is operated in suchlike environments.
Electromagnetic
interference
measurements
Compliance Electromagnetic environment – guideline
Harmonic emissions
IEC 61000-3-2
Class A
The MOT-VS600 is suitable for use in all establishments,
other than domestic establishments and those directly
connected to the public low-voltage power supply network
that supplies buildings used for domestic purposes.
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
Complies
RF emissions
CISPR 11
Class A
RF emissions
CISPR 11
Group 1
The MOT-VS600 uses RF energy only for its internal
function. Therefore, its RF emissions are very low and are
not likely to cause any interference in nearby electronic
equipment.
- Do not use any accessories other than those specified by our
company.
This can result in increased emissions and reduced immunity.
- Do not use it adjacent to or stacked with other equipment.
Normal operation may not be possible due to electromagnetic
interference.
- Before using other medical electronic devices (especially life
support devices) to be used together, make sure that they will
not malfunction due to electromagnetic interference.
Normal operation may not be possible due to electromagnetic
interference.
WARNING