manualshive.com logo in svg

Miyachi 500DP, User Manual, Page: 49 / 93

Share
Download
Miyachi 500DP User Manual Download Page 49

CHAPTER 6:  PROCESS DEFINITIONS AND WELD FUNCTIONS 

 

 

875DP/500DP/500HV DUAL PULSE 

RESISTANCE WELDING

 

POWER SUPPLIES

 

6-4 

990-290 

   [HELP]     

[RUN STATES]       PAGE 1/6 

 

       REFERS TO A FRONT PANEL KEY. 

 

USE 

OR 

TO SELECT SCHEDULES WHICH ARE 

NUMBERED 0 THRU 15.. 

 

USE PROG TO MODIFY A SCHEDULE. 

 

USE MENU TO DISPLAY THE MENU WHICH WILL 

PROVIDE MORE INFORMATION. 

 

                           

HELP to Return 

Next 

 

   [HELP]     

[MACHINE STATES]       PAGE 2/6 

 

 

CHNG WILL CHANGE THE SCREEN FORMAT 

    TO INCLUDE THE STATUS OF EITHER THE 

     OUTPUT RELAYS OR THE WELD SENTRY. 

 

SAVE, IS NOT USED IN THE RUN STATE. 

 
 

Last   

   HELP to Return                Next 

 

 

HELP State 

 

The power supply offers you context sensitive help when running or programming.  Press [HELP] 
whenever you have a question.  Press [HELP] again to return to the original screen.  For example, if you 
press [HELP] from the RUN state, information on the function of the power supply keys will be 
displayed as illustrated below: 

 
 

Typical HELP screens.  If there is more than one page of Help, the number of  
pages will be displayed in the upper right-hand corner.  Use 

[

• •

] or [

• •

] 

to  

move from page to page.  Press [HELP] to return to the previous state. 

 
 

NO WELD State 

 

The WELD/NO WELD switch is in the NO WELD position.  The power supply will execute any weld 
schedule, but the capacitor bank will not be discharged and no welding current will flow. 

 

 

FIRE State 

 

The firing switch in the weld head has closed and the welding sequence is proceeding. 

 
 

Weld Function Field 

 

The power supply allows you program 15 weld schedules.  Each schedule can use one of its three weld 
functions.  There are two versions of the basic and rollspot functions: one for an air actuated weld head and 
the other for a manually actuated weld head.  The repeat function only applies to an air actuated weld head. 
 
 
 
 
 

Summary of Contents for 500DP






























































































Reviews:

No comments