Miura MP1-200, Operation Manual

Page: 29 / 63

SECTION 3 OPERATION
21
2.2 Normal Setting Operation
This section specifies operation method for setting (normal setting) that can be displayed by pressing
the “SELECT” switch.
Perform common setting operation in the following procedures.
1) Press the “SELECT” switch as many times as needed to display the desired setting information.
2) Press the “UP” and “DOWN” switches simultaneously.
(The area that allows setting starts blinking.)
3) Press the “UP” or “DOWN” switch to set the desired value.
4) Press the “SELECT” switch as many times as needed to display the digit to be changed.
Repeat 3).
When all the digits are set, the setting is finished with nothing blinking on the display.
The following four items can be set or changed;

Priority
(*)
: ................................... See below.

Current time (hour, minute) ....... P.22

Day of the week ........................ P.22

Cumulative combustion time ..... P.23
Other displayed items are inalterable.
2.2.1 Setting Priority
This information determines the priorities based on which the boilers are fired up.
1) Press the “SELECT” switch as many times as needed to display the priority
(*)
and header steam
pressure.
2) Press the “UP” and “DOWN” switches simultaneously, and then the digit for the priority
(*)
starts
blinking.
3) Press the “UP” or “DOWN” switch to set the desired priority
(*)
.
4) Press the “SELECT” switch to finish the setting.