Miura MP1-200, Operation Manual

Page: 28 / 63

SECTION 3 OPERATION
20
b) Automatic/manual change
Press the “AUTO” switch to change the boiler operation from either automatic operation
(*)
under
MI control
(*)
or manual operation
(*)
by means of the boiler's steam pressure setting.
The “AUTO” LED turns on in automatic operation
(*)
mode.
c) Timer control ON/OFF change
Press the “TIMER” switch to turn ON or OFF the timer control that is set separately. The timer
control can be performed only when the MI Terminal MT1-200 is in automatic mode. The “TIMER”
LED changes depending on the timer control status.
P.28

Combustion under timer control ..... The “TIMER” LED turns ON.

Boiler stops under timer control ..... The “TIMER” LED blinks.

Timer control OFF .......................... The “TIMER” LED turns OFF.
NOTE
You are not able to use TIMER FUNCTION if the local code does not allow you to use it.
d) Resetting complete blowdown notification
Press the “B.BLOW” switch to reset the notification for complete blowdown timing (The “B.
BLOW” LED blinks) specified separately. Resetting the complete blowdown notification causes
the “B.BLOW” LED to turn off.
e) Resetting the soot blow notification
Press the “S.BLOW” switch to reset the notification for soot blow timing (The “S.BLOW” LED
blinks) specified separately. Resetting the soot blow notification causes the “S.BLOW” LED to
turn off. (This function is not used on North American made boiler models.)