9 LONG-TERM STORAGE
Mitsubishi Diesel Engine S16R & S16R2 OPERATION & MAINTENANCE MANUAL
180
Pub. No. K29001-00320 Revision: 1
9
LONG-TERM STORAGE
Storing Engine in Inoperable
Condition
If you will store this engine in inoperable condition
for 3 months or longer (1 year at longest), follow the
procedure shown below.
• Devices and equipment outside the
scope of our supply are included in the
facility. For the details, refer to such a
document as the specifications sheet
prepared by the generator
manufacturer.
• For the devices and equipment outside
the scope of our supply, refer the
corresponding manual of the generator
and the supplier's operation manual.
Storage - Prepare
(Rust-preventive Measure)
Keep away from fire, when working
with flammable substances such as
volatile corrosion inhibitor or rust
preventive oil.
* They may cause a fire.
Keep away from fire, when working
with flammable substances such as
grease.
* They may cause a fire.
* When handling grease, obey the
manufacturer's SDS.
If the engine is stored for 3 month or
longer (up to 1 year), apply rust-
preventive measure properly.
* Otherwise, the internal engine parts and/or
sliding parts may be rusted, which could cause
damage to the devices.
* Follow the storage procedure described in this
Operation & Maintenance Manual.
Use volatile corrosion inhibitor and
rust preventive oil recommended by
us.
* If a product other than the recommendation is
used, the internal engine parts may be rusted
due to insufficient anti-rust effect.
Use new (immediately after opened)
desiccant.
* If you use a product which has been unused for
a long time since its package was opened,
moisture absorbency may be weakened, and
may cause the internal engine parts and/or
sliding parts to rust.
After stopping the engine, spray
volatile corrosion inhibitor while
cranking the engine for at least 2
times.
* Otherwise, anti-corrosive agent may
accumulate and harden on the piston, which
could block turning.
When handling volatile corrosion
inhibitor or rust preventive oil, wear
personal protective equipment such
as protective mask or protective
glasses, and obey the manufacturer's
SDS.
* If such products are breathed in or comes in
contact with the skin, serious personal injury
may occur.
When working with grease, wear
suitable personal protective
equipment such as protective
eyeglasses, rubber gloves, working
clothes with long sleeves and long
trousers.
* If grease comes into contact with your eyes, it
will cause irritations.
* When handling grease, obey the
manufacturer's SDS.
Summary of Contents for S16R
Page 215: ......
