16
Your company internal use only.
Copyright (C) Mitsubishi Electric Corporation.
NR-261UM-07LAN4,-07-5WS
DISASSEMBLING PROCEDURES
●
Disassembling procedures
In reverse of assembling procedures.
●
Assembling procedures
1.Set M015 and screw the five screws(
Ⓒ
).
2.Remve the separator and stick M035 to M015.
3.Set M077 to S5-CHASSIS while matching the two salients.
4.Connect FFC from HDD circuit on S5-CHASSIS to M077.(View F)
5.Stick M029 to Navicore of M077.
6.Set M067, and screw the one screw(
Ⓓ
) and the four screws(
Ⓔ
).
0.4 +0.2/-0.1
M2.6X3
Ⓓ
2.6X4
0.4 +0.2/-0.1
Ⓒ
0.4 +0.2/-0.1
M2.6X6
Ⓔ
Tighten torque(N
・m)
Screw
No.
Ⓔ
x 4
Ⓓ
Ⓒ
x 5
M067: ASSY-SHIELD
M029: SHEET-HS
M077: ASSY-PCB-DIGITAL
M035: SHEET-DI
M015: CASE-DIGITAL
Put on the Navicore.
Lock after FFC
connected.
FFC from HDD.
View F
Engage the connectors.
(Push “PUSH” on circuit board)
Fold
Remove the connector covers.
Fit the dowel to the hole.
Fit the salient of post to
the hole.
S5-CHASSIS
Be careful to not change
the shape when
assembling.