Mitsubishi Mirage 2017, Owner'S Manual, Page: 77 / 305

Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
5-14 Features and controls
5
N00568000025
If you press the engine switch without press-
ing the brake pedal {continuously variable
transmission (CVT)} or the clutch pedal
(manual transaxle) while the vehicle is sta-
tionary, you can change the operation mode
in the order of OFF, ACC, ON, OFF.
N00568101049
When the vehicle is in ACC operation mode
for approximately 30 minutes, the ACC
power auto-cutout function automatically
cuts power to the audio system and other
electronic devices that can be used during
ACC operation mode.
To enable power after ACC power auto-cut-
out function, press the engine switch while in
ACC.
N00503500216
With the F.A.S.T.-key, warnings are given
through buzzers and displayed symbols in
order to prevent mistaken operations or vehi-
cle theft.
When a warning operates, be sure to check
the vehicle and the F.A.S.T.-key. A warning is
also shown if there is a problem in the
F.A.S.T.-key.
If the following warning shows, contact an
authorized Mitsubishi Motors dealer.
NOTE
 Your vehicle is equipped with an electronic
immobilizer. To start the engine, the ID code
which the F.A.S.T.-key sends must match the
one registered to the immobilizer computer.
(Refer to “Electronic immobilizer (Anti-theft
starting system)” on page 5-19)
Changing the operation mode
CAUTION
 When the engine is not running, put the oper-
ation mode in OFF. Leaving the operation
mode in ON or ACC for a long time when
the engine is not running may cause the bat-
tery to be discharged, making it impossible
to start the engine.
 When the battery is disconnected, the current
operation mode is memorized. After recon-
necting the battery, the memorized mode is
selected automatically. Before disconnect-
ing the battery for repair or replacement,
make sure to put the operation mode in OFF.
Be careful if you are not sure which opera-
tion mode the vehicle is in when the battery
is run down.

The operation mode cannot be changed from
OFF to ACC or ON if the F.A.S.T.-key is not
detected to be in the vehicle. Refer to “Oper-
ating range for starting the engine and
changing the operation mode” on page 5-11.
ACC power auto-cutout function
NOTE
 It is possible to modify the functions as fol-
lows:
• The time until the power cuts out can be
changed to approximately 60 minutes.
• The ACC power auto-cutout function can
be deactivated.
For details, we recommend you to consult an
authorized Mitsubishi Motors dealer.
Warning activation
There is a problem in the
F.A.S.T.-key
BK0235100US.book 14 ページ ２０１５年１１月２０日 金曜日 午後３時１２分