Mitsubishi Mirage 2017, Owner'S Manual, Page: 146 / 305

Bluetooth® 2.0 interface (if so equipped)
Features and controls 5-83
5
 Press this button when an incoming call is
received to answer the telephone.
 When another call is received during a
call, press this button to put the first caller
on hold and talk to the new caller.
• In such circumstances, you can press the
button briefly to switch between callers.
You will switch to the first caller and the
other caller will be put on hold.
• To establish a three-way call in such situ-
ations, press the SPEECH button to enter
voice recognition mode and then say
“Join calls.”
 Press this button when an incoming call is
received to refuse the call.
 Press this button during a call to end the
current call.
When another call is on hold, you will
switch to that call.

If this button is pressed in the voice recog-
nition mode, the voice recognition mode
will be deactivated.
Your voice will be recognized by a micro-
phone in the overhead console, allowing you
to make hands-free calls with voice com-
mands.
N00564100086
The Bluetooth
®
2.0 interface is equipped
with a voice recognition function.
Simply say voice commands and you can per-
form various operations and make or receive
hands-free calls.
With the Bluetooth
®
2.0 interface, voice rec-
ognition is possible for US English, North
American Spanish, Canadian French and Jap-
anese. The factory setting is “English.”
PICK-UP button
HANG-UP button
NOTE
 When you press the SPEECH button to enter
voice recognition mode with a cellular phone
paired to the system, current information on
the cellular phone, such as “remaining bat-
tery life,” “signal strength” or “roaming,”
will be displayed on the audio display.
*
* : Some cellular phones will not send this
information to the Bluetooth
®
2.0 interface.

Call waiting and three-way calls can be used
by the Bluetooth
®
2.0 interface, only if it is
possible to use those services with your cel-
lular phone.
Microphone
NOTE
 If a cellular phone is within close proximity
of the microphone, it may distort the sound
quality. In this case, place the cellular phone
as far as possible from the microphone.
Voice recognition function
NOTE
 If the voice command that you say differs
from the predefined command or cannot be
recognised due to ambient noise or some
other reason, the Bluetooth
®
2.0 interface
will ask you for the voice command again up
to 3 times.
 For best performance and further reduction
of ambient noise, the vehicle windows
should be closed, lower the blower speed and
refrain from conversation with your passen-
gers while engaging the voice recognition
function.
 Some voice commands have alternative
commands.
 Depending on the selected language, some
functions may not be available.
BK0235100US.book 83 ページ ２０１５年１１月２０日 金曜日 午後３時１２分