Mitsubishi Mirage 2017, Owner'S Manual, Page: 164 / 305

Bluetooth® 2.0 interface (if so equipped)
Features and controls 5-101
5
1. Press the SPEECH button.
2. Say “Phonebook.”
3. The voice guide will say “Select one of
the following: new entry, edit number,
edit name, list names, delete, erase all, or
import contact.” Say “Import contact.”
4. The voice guide will say “Would you like
to import a single entry or all contacts?”
Say “All contacts.”
5. The voice guide will say “Importing the
contact list from the mobile phonebook.
This may take several minutes to com-
plete. Would you like to continue?”
Answer “Yes,” transferring to the mobile
phonebook the phonebook stored in the
cellular phone will start.
Answer “No,” the system will return to
the main menu.
6. When the transfer is complete, the voice
guide will say “Import complete” and
then the system will return to the main
menu.
N00566301092
MODEL: MMC FCC ID: CB2MDGMY10
IC: 279B-MDGMY10
Your Bluetooth
®
2.0 interface operates on a
radio frequency subject to Federal Communi-
cations Commission (FCC) Rules (For vehi-
cles sold in U.S.A.) and Industry Canada
Rules (For vehicles sold in Canada). This
device complies with Part 15 of the FCC
Rules and RSS-210 of the Industry Canada
Rules. Operation is subject to the following
two conditions:
 This device may not cause harmful inter-
ference.
 This device must accept any interference
received, including interference that may
cause undesired operation.
The term “IC:” before the radio certification
number only signifies that Industry Canada
technical specifications were met.
The antenna used for this transmitter must not
be co-located or operating in conjunction
with any other antenna or transmitter. End-
users and installers must be provided with
installation instructions and transmitter oper-
ating conditions for satisfying RF exposure
compliance.
FCC Notice: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to
 If telephone numbers contain characters
other than 0 to 9,
* , # or +, these characters
are deleted before the transfer.
 For the connection settings on the cellular
phone side, refer to the instructions for the
cellular phone.
NOTE
 The transfer may take some time to complete
depending on the number of contacts.
NOTE
 If the Bluetooth
®
2.0 interface could not be
connected to the Bluetooth
®
compatible cel-
lular phone, the voice guide will say “Unable
to transfer contact list from phone” and then
the system will return to the main menu.
 If you press the HANG-UP button or press
and hold the SPEECH button during the data
transfer, the transfer will be cancelled and
the system will return to the main menu.
 If an error occurs during the data transfer, all
transfer will be cancelled and the voice guide
will say “Unable to complete the phonebook
import” and then the system will return to
the main menu.
 If there are no contacts in the phonebook, the
voice guide will say “There are no contacts
on the connected phone.”
General information
NOTE
CAUTION
 Changes or modifications made to this
equipment not expressly approved by the
manufacturer may void the FCC authoriza-
tion to operate this equipment.
BK0235100US.book 101 ページ ２０１５年１１月２０日 金曜日 午後３時１２分