Mitsubishi Mirage 2017, Owner'S Manual, Page: 207 / 305

AM/FM electronically tuned radio with CD player (if so equipped)
7-20 Comfort controls
7
N00711901742
N00712001421
Turn the VOL switch clockwise to increase
the volume; counterclockwise to decrease the
volume.
The status will be displayed in the display.
N00712101709
1. Press the /MENU button to select
BASS

TREBLE

FADER

BAL-
ANCE

Sound control mode off.
2. Turn the SEL switch either clockwise or
counterclockwise to change the tone/bal-
ance setting.
The status will be displayed in the display.
To select the desired bass level.
To select the desired treble level.
To balance the volume from the F (front) and
the R (rear) speakers.
To balance the volume from the L (left) and
the R (right) speakers.
N00734901925
Volume and tone control panel
1- PWR (On-Off)/VOL (Volume con-
trol)/SEL (Select) switch
2- Display
3-
/MENU (Mode change) button
4- SEL (Select) indicator
5-
(Return) button
To adjust the volume
To adjust the tone
BASS (Bass tone control)
TREBLE (Treble tone control)
FADER (Front/Rear balance con-
trol)
BALANCE (Left/Right balance
control)
NOTE
 When operation of turn of the SEL switch is
enabled, the SEL indicator will appear on the
display.
 When set to “0”, it will beep.
 When the following operation is performed,
this mode will be canceled.
• The button is pressed.
• The another mode is selected.
• The any adjustment is not performed for
more than 10 seconds.
 In a two-speakers vehicle, keep the FADER
setting in the middle position. Since no rear
speakers are connected, adjusting the
FADER setting toward the “R” (rear) side
will result in a loss of sound output.
Radio control panel and display
1- RADIO (AM/FM selection) button
BK0235100US.book 20 ページ ２０１５年１１月２０日 金曜日 午後３時１２分