3. Setting
3.3 Setting Menu 2:
Communication Settings (Setting the MODBUS
®
RTU communication and CC-Link
communication)
In the operation mode, press
+
simultaneously for 2 seconds or more, and the following operation
- 19 -
becomes available.
Set the
MODBUS
®
RTU
parity.
W hen the CC-Link communication is selected in
Communication method selection, this display will be skipped.
④
MODBUS
®
RTU
parity
non
odd
even
（
EVEn
）
Set the
MODBUS
®
RTU
baud rate.
When the CC-Link communication is selected in
Communication method selection, this display will be skipped.
③
MODBUS
®
RTU
baud rates
2400bps
4800bps
9600bps
19.2kbps
38.4kbps
Set the
MODBUS
®
RTU
address number.
When the CC-Link communication is selected in
Communication method selection, this display will be skipped.
Selectable addresses:
1 to 255
②
MODBUS
®
RTU
address
Select either of “CC-Link communication” or “MODBUS
®
RTU communication.”
When the ME-0040C-SS96 optional plug-in module is not installed,
this display will be skipped.
CC
：
CC-Link communication
Mb
．
rtu
：
MODBUS
®
RTU
communication
W hen “CC-Link communication” is selected, go to
CC-Link station number.
①
Communication
method selection
Set the
MODBUS
®
RTU
stop bit.
W hen the CC-Link communication is selected in
Communication method selection, this display will be skipped.
⑤
MODBUS
®
RTU
stop bit
Stop bit 1
Stop bit
2
SET
DISPLAY
SET
DISPLAY
SET
DISPLAY
SET
DISPLAY
SET
DISPLAY
SET
DISPLAY
Set the setting menu number to “2”.
(as shown in the right figure)
SET
RE
T
SE
Setting Menu
