−
8
−
ON
OFF
Power
ON
OFF
Power
Maintenance - Continuation
Turning the power off before maintenance
1
Cleaning the unit exterior and hand drying area
2
1
Pull the tab, open the front cover and turn the
power switch "OFF".
Refer to "How to open/close the front cover" on page 4.
2
Wipe the unit exterior, the inside of the front
cover, and the hand drying area with a tightly
wrung out piece of cloth.
When it is unclean, wipe it with a piece of cloth that has
been soaked in neutral detergent and tightly wrung out,
thoroughly remove the remaining neutral detergent and
wipe it with a dry piece of cloth.
Please be sure to wipe with a piece of cloth that has been
wrung out tightly as water may enter the unit and cause
damage if it is wiped with a very wet piece of cloth.
Clean the sensor area.
※
The sensor may lose its sensitivity and malfunction if
the transparent surface inside the hand drying area
is covered with a white-colored substance. Please
clean it once a week.
3
Clean the dust off of the hook of the
front cover with a commercially available
toothbrush or cotton swab
NOTE
The front cover is designed to come off in order to
prevent damage if it is opened too far.
If it comes off, please reattach it while referring to
"Precautions for when opening/closing the front cover"
(Page 4).
4
Turn the power switch "ON" and close the
front cover so that there is no gap and push
the tab.
Exterior
Nozzle
Sensor
Hand drying area
Panel hook of the unit
Hook of the
front cover
Hook of the front cover
Cotton swab,
toothbrush, etc.
Cotton swab,
toothbrush, etc.
Panel hook of
the unit (both the
upper and lower
parts)
2
Open the front cover and turn the power switch "OFF".
Power switch
Power "OFF"
1
Pull the tab and open the front
cover.
Main unit
Front cover
Tab
Power switch
Front cover
Open
Power "OFF"
Front cover
Open
Water may enter the unit and cause short circuits,
electric shocks or damage if the front cover has been
forgotten to be closed.
Caution
Pull
